add wishlist add wishlist show wishlist add compare add compare show compare preloader
Lexus RX330 Air Suspension Conversion

2003-2008 Lexus RX330 Air Suspension Conversion (TG14F)

$1,149.00 In Stock Sold out
CODE: TG14F
Categories: LEXUS

FAST SHIPPING

PREMIUM QUALITY

12 MONTHS WARRANTY

  • Description
  • Shipping and Refund
  • Warranty
  • Reviews

Fix your 2003 - 2008 Lexus RX330 Air Suspension Conversion Kit (TG14F)

Having air ride problems on an RX330? If you're here, you're at least kicking around the idea of installing a Lexus RX330 Air Suspension Conversion on your Lexus. If you're looking for a lower cost, more permanent option than spending $1,200 each on a single air strut, you've come to the right place. Most people don't realize that air systems are engineered to last right at 10-years before needing major repairs. You guessed it, just after the manufacturer and extended warranties are expired! You should keep a few things in mind before spending a dime on this old system. Bear in mind you have a total of 4 air struts on this Lexus that WILL need to be replaced sometime soon. If you do the math, it's $1,200 x 4 for only four parts of the system.

This doesn't include the compressor, solenoid block, module, etc. You have to wonder if putting that kind of money is wise on a 10-year-old car. Whats the answer? Not only is our Lexus RX330 Air Suspension Conversion the ideal solution to permanently resolve all air suspension problems forever, but it also increases the reliability of the vehicle at 1/4 the cost! 

This Lexus RX330 Suspension Conversion Kit Includes:

  • Front and Rear Name Brand Strut and Spring Assemblies.
  • Easy to follow instructions clearly show technicians how to install the new conversion kit.
  • Instructions are included to cancel out the suspension message on your RX330.

 

Why Buy Lexus RX330 Suspension Parts From American Air Suspension?

Expert Experience You Can Trust

Nobody knows these systems better! The owner of American Air Suspension (AAS) was a Certified Air Suspension Expert for over 20 years. During this time, he quickly learned what were the best parts... and which parts to leave for "the other guys". You can trust AAS to bring you only the best parts available for your car Suspension. Learn More...

Backed by the Automotive Community

Need a reference? How about thousands of references? The one's that know us the best are the ones on the Ford & Lincoln Forums. Learn how we impact the auto world by visiting: markviii.org, Lincoln VS Cadillac, FordTrucks.com, Lincolns online & many, many more.

For more in-depth information or product questions, don't hesitate to email us at info@americanairsuspension.com.

 

Lexus RX330 Air Suspension Help and Common Problems

What about the computer? Won't the suspension light come on?

No. The instructions provided will give a clear explanation how to disarm the suspension warning message.

Why is your kit better than any others?

Our Lexus RX330 Air Suspension Conversion is comprised of the absolute best struts and Coil Springs available!

Does my mechanic have to cut or weld anything?

No, never. This Lexus RX330 Air Suspension Conversion is designed to be a bolt-on installation. Installation instructions are included.

How is the vehicle ride after the Lexus RX330 Air Suspension Conversion?

The ride is comparable; some say better than the vehicle when it had air. You no longer have the barge feeling driving down the road. Most people describe it as being "more controlled".

How many hours does it take for the conversion?

You should figure between 3-4 hours times the shops labor rate, but this can vary greatly depending on the shop.

Will this kit fit a front wheel drive RX330?

The All Wheel Drive(AWD) and the Front Wheel Drive(FWD) kits are slightly different but share the same cost. Simply choose if your car is an AWD or FWD when ordering.


2003-2008
Lexus RX330 Air Suspension Conversion:

 

Lexus RX330 Air Suspension Conversion

 

When installing a Lexus RX330 Air Suspension Conversion on ANY vehicle be sure to follow all safety procedures. Make sure that when you lift your car, that you're using a sturdy and dependable jack and jack stands and that the vehicle is parked on a flat and level surface. Failure to do so can result in the vehicle sliding off its supports and onto you! Make sure you have or can obtain all the tools required beforehand. A list of the tools needed is below, but gloves and especially eye protection should be standard equipment on any job.
Be sure to follow the instructions in the specified order, as they are laid out in a particular order for a reason. Improper installation and even installation in the incorrect order can cause damage to these parts that are NOT covered under your warranty! Always take precaution not to exceed the gross vehicle weight rating recommended by the manufacturer.

These instructions are furnished only to give you an idea of the task at hand. When installing your kit, please use the instructions provided with the kit, as they will include pictures to aid with the install as well as the suspension warning light out instructions.
 
Tools Needed for Lexus RX330 Air Suspension Conversion:
Metric Socket Set
Floor Jack
Jack stands
Metric Wrenches
Screwdrivers(Phillips-head & Flat-head)
Wire Cutters/stripper/crimping tool
Level Work area

We recommend this installation in 5 general categories:
Read general service precaution
Support the vehicle in a level area
Remove air suspension air bags
Install conversion spring
Disable ride control
 
FRONT STRUT REMOVAL GUIDE:
* Lift vehicle and place on Jack stands or Vehicle hoist.
* Remove all four wheels.
* Open the hood and locate the upper air strut mounting studs. (they are under the cowl grill screens)
* Remove the cover retaining nuts and cover.
* Making sure vehicle is being fully supported, slowly loosen the airline retaining nut and allow any air pressure to escape. Remove the line by pulling up.
* Remove two of the stud nuts and loosen the third, but DO NOT remove yet!
* Remove the brake & ABS line retaining bolt to remove from the strut.
* Remove the ABS line plastic bracket from the strut.
* Remove the sway bar link retaining nut, and remove from the strut.
* Being careful NOT to allow the spindle hub to fall back towards you, remove the lower strut from spindle arm. (if you're not careful, it may pull the cv joint out of position)
* While holding lower strut, remove the loosened stud nut from above and remove the strut from the vehicle.
 
Repeat steps for the other side of the car.
 
FRONT STRUT INSTALLATION:
* Remove upper retaining stud nuts and washers and set aside.
* Place strut up into the wheel well and align the upper studs through the holes and place washers and nuts on the studs and tighten.
* Place spindle arm into the lower struts mounting bracket and insert bolts and nuts, then tighten.
* Connect sway bar link to the new strut, using the removed nut and tighten.
* Install the brake and ABS line bracket onto the strut with the removed bolt and tighten.
* Clip the ABS plastic wire retainer onto the strut.
* Make sure all bolts are tight.

Repeat steps for the other side of the vehicle.
* Install wheels and torque to factory recommended specs.

FRONT CONVERSION IS NOW COMPLETE
 
REAR STRUT REMOVAL GUIDE:
* Open the rear door and locate the upper strut mounting studs under the wheel well trim panel.
* Remove the two of the three stud nuts, but ONLY LOOSEN the third nut!
* Remove the air line from the top section of the air bag, by using line remover.....or just cutting the line. (CAUTION: Air bag may be under pressure)
* Remove the ABS line retaining bolt.
* Remove the brake line retaining bolt.
* Remove sway bar link from the strut.
* Support the lower control arm with a jack stand and then remove the struts lower retaining bolts.
* Remove the previously loosened upper stud nut from inside the vehicle.
* Remove the lower strut from the spindle arm and remove the strut from the vehicle, but DO NOT allow spindle hub to fall back towards you, as it may pull the CV joint out of position.

Repeat steps for the other side of the vehicle.

REAR LEXUS RX330 AIR SUSPENSION CONVERSION INSTALLATION:
* Remove the nuts and washers from the top of the strut and set aside.
* Place strut up into the wheel well and align the upper studs with the existing holes. Push studs through the holes and place washers and nuts on the studs and tighten.
* Place spindle arm into the lower struts mounting bracket and insert bolts and tighten.
* Connect sway bar link to the new strut, using the removed nut and tighten.
* Install the brake line retaining plate to the bracket on the back of the strut, using the removed bolt and tighten.
* Install the ABS line retaining plate to the bracket on the strut, using the removed bolt and tighten.
* Make sure all bolts are tight.

Repeat steps for the other side of the vehicle.

The L
exus RX330 Air Suspension Conversion is now complete.

We highly recommend having a Four Wheel Alignment done after a week or so after the springs settle.

 

Nobody Has a Better
Lexus RX330 Air Suspension Conversion

 

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at info@americanairsuspension.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / Non-Returnable Items

Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item. Unfortunately, we cannot accept returns on sale items or gift cards.

Exchanges

The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

Refunds

We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.

Americanairsuspension.com offers a one year warranty (excluding all Air Ride / Smart Ride SKUs) for United States on all Air Springs, Air Struts, Coil Spring Conversion Kits and other Suspension Kits. Americanairsuspension.com offers a 30-Day Return Policy on unused and uninstalled products.

Americanairsuspension.com offers a 30-Day Warranty on parts used in commercial vehicles. Improper use or installation is not a manufacturer's defect and is not covered by the warranty. The Americanairsuspension.com Warranty is non-transferable.

For complete Warranty details and limitations, please click here.