add wishlist add wishlist show wishlist add compare add compare show compare preloader
2000-2005 BMW X5 Air Suspension Conversion (BB14FBM)

2000-2005 BMW X5 Air Suspension Conversion (BB14FBM)

$899.00 In Stock Sold out
Categories: BMW




  • Description
  • Shipping and Refund
  • Warranty
  • Reviews

Fix your 2000 - 2005 BMW X5 Air Suspension Conversion (BB14FBM)

Got BMW X5 air suspension problems? Before you spend another dime on the air system, you should know there's a cheaper, longer lasting solution to that expensive factory air suspension system. Our BMW X5 Air Suspension Conversion is an inexpensive solution to a system that's designed to die right at the 10-year mark! Converting to a conventional coil spring system makes your life just a little easier, knowing that you have one less worry.

Keep in mind that an air suspension failure isn't just an inconvenience like an a/c system going out. Most air suspension failures after the ten-year mark, are usually quite expensive and can even leave you stranded on the side of the road relying on a flat-bed wrecker to get you and your vehicle to safety! We've put together this kit where your installer can quickly and safely improve the quality of ride with the BMW X5 air suspension conversion, all the while significantly improving reliability. Our kit is proudly made in the United States and features a lifetime warranty.

NOTE: For our light-cancelling module to work properly, your vehicle must be equipped with the rain sensor on the rear view mirror.

A solution that'll work as good 10 years from now as it did from the beginning. Something the air suspension just can't do! Install an BMW X5 Air Suspension Conversion Kit and be done with those air issues forever! This Premium BMW X5 Air Suspension Conversion Kit will eliminate your air suspension problems forever, all while retaining the factory ride height!

American Air Suspension can supply you with the best kit on the market to cancel out those mega-expensive Air Suspension repairs and increase your BMW X5's reliability! As far as cost goes, the Front & Rear BMW X5 Suspension Conversion Kit is less than replacing just one air strut alone. This BMW X5 Coil Spring Conversion Kit comes with all the parts you need to safely and thoroughly convert your BMW X5 to a conventional coil spring-type suspension without all the air suspension headaches.

This BMW X5 Suspension Conversion Kit Includes:

  • Pre-Assembled Brand Name Coil Springs on Custom struts.
  • Brand Name Rear Coil Springs and Custom shocks.
  • Easy to follow instructions clearly show technicians how to install the new conversion kit.
  • An electronic module is included to cancel out the suspension warning message on your X5.
  • These high-quality BMW parts are proudly made in the United States.
  • The BMW X5 Air Suspension Conversion is equipped with a lifetime warranty to provide added security and comfort for an extended period.


Why Buy BMW X5 Suspension Parts From American Air Suspension?

Expert Experience You Can Trust

Nobody knows these systems better! The owner of American Air Suspension (AAS) was a Certified Air Suspension Expert for over 20 years. During this time, he quickly learned what were the best parts... and which parts to leave for "the other guys". You can trust AAS to bring you only the best parts available for your car Suspension. Learn More...

Backed by the Automotive Community

Need a reference? How about thousands of references? The one's that know us the best are the ones on the Ford & Lincoln Forums. Learn how we impact the auto world by visiting:, Lincoln VS Cadillac,, Lincolns online & many, many more.

For more in-depth information or product questions, don't hesitate to email us at

BMW X5 Air Suspension Help and Common Problems

What about the computer? Won't the suspension light come on?

No. The suspension warning message will be automatically canceled out with the use of our electronic module that is included in this kit. After installation, you'll never get another suspension warning message! The suspension warning message will be automatically canceled out with the use of our electronic module that is included in this kit.

Why is your BMW X5 Air Suspension Conversion better than others?

Our BMW X5 Air Suspension Conversion is comprised of KYB struts and shocks and the Best Coil Springs on the planet! 

Does my mechanic have to cut or weld anything?

Never. Our Coil Conversion Kit is designed to be a 100% bolt-on installation with no drilling, cutting or welding required.

Why is the 2006 model not mentioned for this BMW X5 Air Suspension Conversion?

At the present time, we not have a suspension warning light module that is compatible with the 2006 model.

What if my mechanic has problems with the install, what then?

The BMW X5 Air Suspension Conversion comes with illustrated instructions, but we also furnish a toll-free number to our tech dept, where they can get their questions answered.

How many hours does it take for the BMW X5 Air Suspension Conversion?

You should figure between 3-4 hours times the shops labor rate, but this can vary greatly depending on the shop. This kit comes with everything you need to convert the front and rear of a 2000-2005 BMW X5.

BMW X5 Air Suspension Conversion:

BMW X5 Air Suspension Conversion Kit
When installing a BMW X5 Air Suspension Conversion Kit on ANY vehicle be sure to follow all safety procedures. Make sure that when you lift your vehicle, that you're using a sturdy and dependable jack and jack stands and that the car is parked on a flat and level surface. Failure to do so can result in the vehicle sliding off it's supports and onto you! Make sure you have or can obtain all the tools required beforehand. A list of the tools needed is below, but gloves and especially eye protection should be standard equipment on any job.

Be sure to follow BMW X5 Air Suspension Conversion Kit instructions in the specified order, as they are laid out in a particular order for a reason. Improper installation and even installation in the incorrect order can cause damage to these parts that are NOT covered under your warranty! Always take precaution not to exceed the gross vehicle weight rating recommended by the manufacturer.

Tools Required for BMW X5 Air Suspension Conversion:
Metric Socket Set
Floor Jack or Vehicle lift
Jack Stands
Screw Drivers(Phillips and Flathead)
Wire Cutter/Stripper/Crimping Tool
Needle Nose Pliers
Pry Bar
Basic Tools

We recommend this installation in 5 general categories:
Read general service precaution
Wear eye protection
Make sure vehicle in on a level surface and well supported
Remove factory air struts
Install BMW X5 Air Suspension Conversion
Disable ride control light(By wiring in electronic module)

* Lift vehicle with the suspension fully extended safely and securely on a lift or jack stands.
* Remove tires front and rear.
* Raise hood for access to top mounting bolts.
* Locate brake line that attached to the strut.
* Pop clip that holds it in place and remove the brake line from the housing.
* Find sway bar link attached to the strut.
* Using impact gun or wrench, remove sway bar link from its housing on the strut.
* Using impact gun or wrench on both sides, remove top bolt and tap out with mallet or hammer.
* Use the same process to remove both top and bottom bolt.
* Once both bolts are removed, the complete hub assembly will fall.
* Be sure the brake line is disconnected from strut and sway bar link is removed.
* Remove washer fluid reservoir with 10mm socket.
* Take a 13mm socket and remove mounting stud bolts.
* Once all three are removed, be sure to catch strut from dropping.
* Once bag has dropped the air line should be visible.
* Use the correct wrench and remove air line from the strut.
* Then strut can be removed from strut housing.

Repeat steps for the other side of the vehicle.

Front strut removal is complete.

* Take pre-assembled struts and place top mounts correctly in three holes in the strut housing.
* Once strut is aligned properly in strut housing, take nuts and BY HAND, place them on mounting studs.
* Once you have placed all three on, hand tighten.
* Then go ahead and reinstall the washer fluid reservoir.
* Using a stand-up jack, apply pressure to the hub by pushing upward to align holes on strut with mounting holes on the hub assembly.
* Once bottom and top bolts are securely in place, tighten down with impact gun or wrenches.
* Then, at the bottom of the strut, locate your sway bar link and place back in the housing.
* Tighten down using impact or wrenches until tight.
* Place brake line back in its housing.
Using same clip, reinstall clip holding brake line in place.

Repeat steps for the other side of the vehicle.

* Pull up the carpet in the storage compartment in the rear of the car.
* Remove spare tire cover panel and all plastic panels.
* Remove yellow air feed to the air canister.
* Cut large black air line that goes from canister to the rear air bag.
* Remove black air canister.
* Locate the rear air bags in the rear.
* Then find the rear shocks and unbolt the bottom of both rear shocks and let hang out of the way.
* Locate the clip that is holding the bottom of the air bag into its mounting position.
* Using needle nose pliers, remove the clip in the lower part of the air bag.
* Pull out the air bag.
* Using a jack, push up on the rear support arm and remove the bolt from the bottom of the shock assembly.
* Locate the sway bar linkage and remove the nut, then pull the sway bar linkage out, toward the front of the car.
* Locate the track arms assembly, which is the one closer to the front of the car.
* Remove track arms nut with a 16mm wrench and pull track arms assembly out of your way.
* Locate rear ride height sensor, remove the nut from the sensor and push out of your way.

Repeat steps for the other side of the vehicle.

* Disassemble the rear bottom plate to where the only thing you have been a bolt, big washer and bushing on the bolt.
* Lube bushing and insert bolt through the big hole on control arm where the air bag came out of to a tight fit.
* Then place your spacer on the bolt to cover the hole. Then add the washer nut and bolt. Tighten until tight with impact gun or wrench.
*Place rubber spring seat around spacer, so that there's no metal on metal rubbing.
* Disassemble rear top plate completely to where all parts are away from each other.
* Take countersunk spacer and place in the hole upwards on the bottom of the air bag tower.
* Take your bolt and one washer and run through the hole on the top side, all the way through the spacer.
* Add your other washer with lock washer and nut and tighten until secure.
* Using a pry bar, pry down as much as needed to place spring properly on seats.
* Be sure to place open, where coils are further separated downward to the rear bottom plate.
* Be sure to put spring correctly around correct seats and turn spring to where it sits properly on spring seats.
* Once the BMW X5 Air Suspension Conversion Kit is correctly installed, go back and check to make sure spring is sitting properly on the spring seats. (if it's not sitting in the seat properly, it WILL cause noises)
* Reinstall ride height sensor, sway bar, forward track arm, shock, and all interior pieces.

Repeat steps for the other side of the vehicle.

* Reinstall all wheels and torque lug nuts to factory recommended torque specs.
* Lower vehicle.
Front and Rear BMW X5 Air Suspension Conversion Kit is now complete.

We highly recommend having a four wheel alignment done after a week or so
(after the springs settle)
Nobody Has a Better

BMW X5 Air Suspension Conversion Kit

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / Non-Returnable Items

Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item. Unfortunately, we cannot accept returns on sale items or gift cards.


The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.


We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too. offers a one year warranty (excluding all Air Ride / Smart Ride SKUs) for United States on all Air Springs, Air Struts, Coil Spring Conversion Kits and other Suspension Kits. offers a 30-Day Return Policy on unused and uninstalled products. offers a 30-Day Warranty on parts used in commercial vehicles. Improper use or installation is not a manufacturer's defect and is not covered by the warranty. The Warranty is non-transferable.

For complete Warranty details and limitations, please click here.

Customer Reviews

Based on 1 review Write a review